¤ Verge of cracking ¤

NoPidy · Backside 180 Joined: 21 Apr 2005 Posts: 534 City: Glenwood

Sorry if yer getting tired of listenning to me b*tch, but what the frick does a guy gotta do to get a ride. Crying or Very sad

I was supposed to go today, my friend just got his new jetski, but nnnooo. So me and my bro searched for some ponds to hit up with the quad. We found 2 possibilities.

One is on private land that is probly half a foot deep with grass under it, is that possible to skate on?

And the other is a swamp back in the trees with about 4 inches of fresh water and a foot of muck on the bottom. (i would seriosly have to be on dope or something to step into this pond, i'd prolly get aids from it)

What is the least amount of water needed????? I seen that urban skating video and that must not have been more than half a foot.

BLP010 · Pop Shuvit Joined: 10 Apr 2005 Posts: 136 City: Rochester

half a foot is plenty. to bad you dont live close to ottertail, we ride every weekend and are always looking for riders(especially with gas prices). shred the gnar.

Raven · Posted: May 20, 2005 9:42 pm Post subject:

4" is a minimum, but definetly doable. If your hard up as you sound I think you should set up some stuff to jib. Put out something to ollie over and make a flat bar to slide. Warm that sh8t up homey.

Frye · Guest Joined: 14 Sep 2003 Posts: 3337

¤¤¤¤¤¤¤¤¤¤¤¤¤ IF I SEE IT ONE MORE TIME I WILL CRACK

NoPidy · Backside 180 Joined: 21 Apr 2005 Posts: 534 City: Glenwood

(alt key) + (0) + (1) + (6) + (4) = ¤ <-- Twisted Evil

Raven, i never thought of making a jib, yer a genius! I got shat loads of scrap metal i could make a flat bar out of and we just got a new wirefeed welder, so i am set.

-=AlexXx=- · Posted: May 21, 2005 8:33 am Post subject:

metal flat bar .... ummmm.... Neutral

GO DITCH SKATE!

ZoSo · Backside 180 Joined: 15 Apr 2005 Posts: 900 City: Winnipeg

I'm about to crack...the plumer didn't put the waterline in and the electrician hasn't hooked up the electricity for our new cabin and on top of that it's raining, which isn't supposed to stop 'till Monday, which means we won't be going. I've been waiting 9 months for this weekend, and it's just not going to happen... Evil or Very Mad

NoPidy · Backside 180 Joined: 21 Apr 2005 Posts: 534 City: Glenwood

-=AlexXx=-, you wouldn't suggest makin a flat bar outa metal? And i would ditch skate, almost all the ditches around here have like a foot or two of water in them, but these fricken hard yellow plants are thick throughout the ditches and there is no possible way of getting around them.

Raven · Posted: May 21, 2005 8:17 pm Post subject:

wakeskating+scrap metal flat bar=frankenstein

Don't do it lo! Use wood it's softer and safer and easier to build with. Go get a nice long 2x12 about 12", and drill it into some 2x4 or 4x4 posts (sharpen the ends like a V) on the sides and corners and sledge that momma jammma home and then back side lip that slut.

-=AlexXx=- · Posted: May 21, 2005 9:52 pm Post subject:

ya metal is crazy,u dont wanna get impailed by a big rusty metal thing.

NoPidy · Backside 180 Joined: 21 Apr 2005 Posts: 534 City: Glenwood

k, it just doesn't seem like my skate would slide well on wood. I do got some left over "fakeice" crap that i can use.

-=AlexXx=- · Posted: May 22, 2005 12:48 pm Post subject:

get that plastic stuff tahts like wood, my neighbor jsut mad his dock outa it, it loks like it would slide awsome. I donno what its called but its been mentioned on the site b4..