Shaping the edges on my Integrity

midnightoil · Faceplant Joined: 28 Mar 2005 Posts: 15

Cheers Nick thats what i was looking for, because on the site it says to round off the edges to have it sit lower, i didnt know if it was to round them so its the same all the way or just in the middle or on the tips etc! I know its more of a test then anything its just nice to see how other Integrity riders have theirs. Cheers dude

electricsnow · cassette Joined: 14 Sep 2003 Posts: 10756 City: Jefferton

I love mix-matching stickers, especially if it pisses grouch off. Very Happy

wakeskatefooo · Backside 180 Joined: 11 Oct 2004 Posts: 908 City: odessa

i put dc stickers on my integ so now i wear those to skate in

wakeskatefooo · Backside 180 Joined: 11 Oct 2004 Posts: 908 City: odessa

so i dont look stoopid Smash

wakeskatefooo · Backside 180 Joined: 11 Oct 2004 Posts: 908 City: odessa

i didnt do nething to my edges cause if it sat ne lower id have to ride at like 40 mph

Budda · Faceplant Joined: 23 Sep 2003 Posts: 10 City: Austin

I put a variable edge on mine and like it a lot better. Most of the sanding in the middle and tappered off toward the ends. Main thing is you cannot put it back on so sand some and give it a ride. Then sand more if you want to.

It sits a little lower in the water, slides on the water better and is not as twitchy. I didnt touch the ends of the board.

PedroEA · Faceplant Joined: 15 Jan 2010 Posts: 16

I have a OMEN revolt, well I have two problems with this wakeskate:

1-The board ride deep on the water. Ollie are very hard.

2-I hit some shuvs and flips, with my friend's board it is easy, but with mine some times when I land it the board kind drag on the water and I fall toward to the front. I belive that is because board is riding deep.

Please, what tips can you give about the kind of reshape should I do, shaper, softer? All the board? Blended?

Thanks very much!

ShutItDown · Frontside 180 Joined: 03 Jan 2010 Posts: 452 City: KC

mojo · Posted: Jan 22, 2010 6:32 pm Post subject:

i'd love to make mine sit a little lower. it's so fast i went from a 42 byerly legacy finless at around 21-22 at 70' to my simplex 40.23 at about 19 and its still so fast. can you even shape simplex rails? it's not a must b/c the board is totally tits, but if i saw a video of it being done i'd feel more inclined to do so.

wakemitch · Posted: Jan 22, 2010 7:11 pm Post subject:

mojo, the urethane rails on the 08-present decks are not ment to be reshaped, but they can be. they are already really round which generally makes decks sit lower in the water. the integrity decks just have a really fast rocker where the byerly skates are pretty slow and drag a bit. also that 40.23 is super wide so that makes it sit higher on the water because of all the surface area.

electricsnow · cassette Joined: 14 Sep 2003 Posts: 10756 City: Jefferton

Just an FYI, most of this thread is like four years old. Laughing

ShutItDown · Frontside 180 Joined: 03 Jan 2010 Posts: 452 City: KC

Good call. haha

Grouch · Kickflip Joined: 16 Feb 2004 Posts: 3146 City: The OC

ShutItDown · Frontside 180 Joined: 03 Jan 2010 Posts: 452 City: KC

It wasn't my fault it came back from the dead though. lol Blame PedroEA

Classy · Posted: Jan 29, 2010 10:21 am Post subject:

ShutItDown, He was saying his post you quoted was 5 years old...and you should be shot for "having a honda sticker on you suby"...this truly isnt that hard to figure out...

lol

BTW, Remove your signature, I shall be the only person with Binary in my sig...

Grouch · Kickflip Joined: 16 Feb 2004 Posts: 3146 City: The OC

I was thinking on the way to work today that a big red H on the back of your car might be ok if you rode a Honda dirt bike or had a Honda lawn mower Question

ShutItDown · Frontside 180 Joined: 03 Jan 2010 Posts: 452 City: KC