integ fins

mojo · Posted: Dec 26, 2008 3:56 am Post subject: integ fins

what's up with the "knob" spacing. if you drill them out can you use regular shanks? you'd think there would be an industry standard.

wakemitch · Posted: Dec 26, 2008 1:29 pm Post subject:

mojo, hyperlite and ronix use different fin hole patterns. everyone else uses the same spacing.

SkateWake772 · Ollie Joined: 08 Nov 2008 Posts: 92 City: Orlando

has anybody had any luck getting some good fins for the integrity. the ones on the website look huge.

mojo · Posted: Dec 26, 2008 9:07 pm Post subject:

wakemitch, since i only rode hyperlite all the years i wakeboarded...who makes a good fin that fits and is smaller?

DIRK · Posted: Dec 26, 2008 11:11 pm Post subject:

SkateWake772, fins are for squares

gatorskater · Posted: Dec 26, 2008 11:17 pm Post subject:

I liked the shanks too, and found that these work:

http://www.buywake.com/catalog/detail/xubH3

Be forewarned you'll need to order screws and this is only for one fin, but try one and then if you like it buy another if you use two.

Just remember that wakeskating is about individuality and what YOU like, don't let people tell you that riding this or that board with or without fins is cool. If we all rode the same board and used the same vest and did the same tricks, well... then we'd all be toolbags.

DIRK · Posted: Dec 26, 2008 11:19 pm Post subject:

ill give someone some fins for free you pay ship though

DIRK · Posted: Dec 26, 2008 11:19 pm Post subject:

actually i would send them in an envolope so dont worry about the shipping Wink

skateonwater · Backside 180 Joined: 21 May 2007 Posts: 757

DIRK, your quite the gentleman

DIRK · Posted: Dec 26, 2008 11:26 pm Post subject:

skateonwater, would you like some Laughing

skateonwater · Backside 180 Joined: 21 May 2007 Posts: 757

im covered DIRK, but thanks anyway. pal.

wakemitch · Posted: Dec 27, 2008 3:19 pm Post subject:

SkateWake772, check out cdi fins.
http://www.cdifins.com/cdifins_fins.html

winch4fun · Posted: Dec 31, 2008 11:45 pm Post subject:

DIRK, hey thanks for the fins, they came in today. i think these small .7" ones will help me out. again man thanks a bunch. props to a great guy Birthday

jake .R. · Posted: Jan 01, 2009 12:02 am Post subject:

first post of 09

YaBro · Backside 180 Joined: 22 Dec 2008 Posts: 624

cwb made a surf board called the Tsunami, it had a front fin and its perfect for integs.......... same mount setup

SkateWake772 · Ollie Joined: 08 Nov 2008 Posts: 92 City: Orlando

i ordered some of the cdi fins so im hoping they will work out.

gatorskater · Posted: Jan 03, 2009 9:10 pm Post subject:

I have some of the CDI fins but I need some hardware that doesn't stick out so much, does anyone know where I can find some screws that fit the hole on a fin with the older larger screws but has a rounded head or fits flush to the board top?

SkateWake772 · Ollie Joined: 08 Nov 2008 Posts: 92 City: Orlando

hardware store