Measurments and pics of the TNT

knox · Kickflip Joined: 14 Jun 2007 Posts: 4693 City: Gainesville

I know some of you have been curious as to the exact measurments of the integritys, so i took out a measuring tape and here's what i got.

Length of board=38.5 in.
Width of board in Middle=15.5 in.
Width of Tip=11.75 in.
Width of Tail=11.75 in.
Concave lengthwise=2 in.
Concave widthwise=0.5 in.

Any more measurments you guys want just tell me.

-=AlexXx=- · Posted: Aug 23, 2008 11:58 am Post subject:

OMG DID U HIT A rail?! Laughing

knox · Kickflip Joined: 14 Jun 2007 Posts: 4693 City: Gainesville

-=AlexXx=-, Yep. I think the people who buy a board and don't want to hit a rail are silly gooses!

eviltweak · Backside 180 Joined: 11 Jul 2008 Posts: 839 City: Nor Cal

are the side walls always blue

kyle · Posted: Aug 23, 2008 12:26 pm Post subject:

I wish this board was 9 pounds Evil or Very Mad

tad · 360 flip Joined: 07 May 2006 Posts: 5031

kyle, 10lbs too heavy?

-=AlexXx=- · Posted: Aug 23, 2008 12:50 pm Post subject:

The Kid, lol i know i was just being facetious

bachlonso · Backside 180 Joined: 02 Jul 2007 Posts: 670 City: NFA

thanks marcus! it's weird though how the team is wider than the tnt. i expected it to be otherways...

skimboarder · Posted: Aug 23, 2008 3:23 pm Post subject:

bachlonso, yeah i figured the TNT would be a little wider, but once you're on it, it's perfect.

The Kid, when i first got mine i thought the graphic was so sweet that i'd never hit my rail on it, but that changed one day later. Smash

knox · Kickflip Joined: 14 Jun 2007 Posts: 4693 City: Gainesville

bachlonso, fo sho.

skimboarder, Integrity+rails=ment to be.

EJazzle · Posted: Aug 23, 2008 3:58 pm Post subject:

i want pictures and exact specs of the bamboo core.

Schmaltz · Backside 180 Joined: 16 Sep 2003 Posts: 721 City: San Jose

Are you measuring the "running length of rocker" or straight across... ?
Cause those measurements i would consider taken improperly.

erikmonty · Backside 180 Joined: 21 Aug 2007 Posts: 845 City: jupiter

pwned

knox · Kickflip Joined: 14 Jun 2007 Posts: 4693 City: Gainesville

Schmaltz, i'm sorry i dont understand your question. When i measured the length i measured straight across with no rocker. I don't know how to take exact measurments of a board, and I apologize if the info is incorrect. Which measurement is wrong?

Cyclone268 · Posted: Aug 23, 2008 5:29 pm Post subject:

Schmaltz, Can we see pictures of an actual core?

dalesk8 · Backside 180 Joined: 03 May 2007 Posts: 719 City: South OZ

gporter · Posted: Aug 23, 2008 5:37 pm Post subject:

The Kid, You made this thread because you knew I would stare at the pics for hours knowing that I have to wait to get my TNT because it takes forevaa!!

Macthc · Frontside 180 Joined: 18 Jun 2008 Posts: 269 City: RDG

man i really wanna ride this board

Kay-Kay · Posted: Aug 23, 2008 8:19 pm Post subject:

The Kid, the TNT is supposed to be 38.65 incehs long not 38.5 inches. The boards are made on CNC machines which have tolerances down to the ten thousandth of an inch so it was not "accidentally" cut out smaller. Traditionally the length of a board is taken along the rocker line not straight from tip to tail.

knox · Kickflip Joined: 14 Jun 2007 Posts: 4693 City: Gainesville

Kay-Kay, ahh, ok. I did not measure it with the concave.