cassette delaminating

sandiegoskate · Posted: Jul 11, 2008 10:03 pm Post subject: cassette delaminating

i have an old 03 cassette linear perspective flat deck thats been delaming for a while Sad

, just wondering if you guys have done anything to fix the delam process, or is the board trashed?

Gnarly Dancer 42 · 360 flip Joined: 21 May 2007 Posts: 5121 City: kalamazoo

you could try marine epoxying between the plys, then sealing it with polurthane

or just regular epoxy

has anyone else found that the 5 minute epoxy works better than the normal stuff?

it always is stronger for me for some reason

sandiegoskate · Posted: Jul 11, 2008 10:25 pm Post subject:

alright for sure, should i clamp it down or anything while its drying?

Gnarly Dancer 42 · 360 flip Joined: 21 May 2007 Posts: 5121 City: kalamazoo

ya definatly use as much clamp power as you can get, weights work too

just try to spead the load evenly

sandiegoskate · Posted: Jul 11, 2008 10:33 pm Post subject:

alright definitley, hopelfully i'll get it nice and sealed up, its the board that i landed my first shuv on Smile

. definitley alot of good memories on it

junglesmacks · Posted: Jul 12, 2008 10:28 am Post subject:

Use some of those wood working stylie c-clamps along the edge. If you don't have any, pick a few mini ones up from a Harbour Freight or pawn shop..

Try and find a small slat of wood to cush between the clamps and board and to spread the force out evenly. This + epoxy and it should at least keep you going for the season..