A Reed for Grinch!

warlock · Backside 180 Joined: 20 Jan 2005 Posts: 1503 City: AC

man i saw that w/ josh leigh on daily habit... all that fu king talk about the grinch... and not one single blip about wakeskating..

Ben Caruso · Posted: Apr 09, 2007 11:51 am Post subject:

Yeah I'm pretty sure that was my vehicle you spotted driving- here's a pic from the tampa boat show- its been accessorized with some Oak paraphenalia- only the finest...

bulletlines · Posted: Apr 09, 2007 1:06 pm Post subject: www.bulletlines.com Pimp Winch

I told Aaron at the Austin Boat show about Pimp Winching Systems; Maybe he did not believe me.

Buy a Pimp Winch... Nothing else out there comes close. Checkout ours below.

Let me tell you what you do see here... 100% aircraft quality aluminum tubing: whats so big about aluminum? our winch weighs less than 100 lbs. Spool is CNC machined with 100% aircraft quality aluminum: spools fit a standard 1" axle, have adjustable inner diameter of 4", 6", and 8", can disingage from the axle to unreel the rope with ease, and once disengaged the spool sits on its own set of ball bearings for even easier unreeling of the spool (especially needed for 750' and above). Motor is a 6.5hp Honda Racing go-cart engine: the engine can be purchased with up to 5 stage modifications that produces up to 22 hp. The engine as seen has the 1st stage modification and produces 9hp. Connected to the side of the engine is a Torq-A-Verter CVT. THIS WINCH WILL PULL A 300 lb + RIDER DEEP WATER START. Disc brake is attached to the trottle lever, and is applied immediately while pulling the throttle back.

Best part of all is that it retails for less than $2000.00

And of course in the bottom left of the first picture you can see our Bullet Lines Winch Rope.

Jeff_Knox · Backside 180 Joined: 31 Jan 2005 Posts: 712 City: J-ville

and you can pick from 3 frames... the cheapest one commin from my blue prints of my first winch...

the pimp winch guys got it goin on for sure

spadedout41 · Frontside 180 Joined: 21 Jul 2005 Posts: 441

roughly how much under 2000 ???

Jeff_Knox · Backside 180 Joined: 31 Jan 2005 Posts: 712 City: J-ville

spadedout41, depends on what you get... if you get the basic frame, no brake, stock engine, and no rope it will be quite a bit under... if you get top of the line it will prolly be over 2k... they are still workin on the website but once its up it will answer all questions...

PimpWinchingSystems · Faceplant Joined: 04 Mar 2007 Posts: 43 City: Tallahassee

spadedout41, PM me if you have any questions. With our new budget winch we can go as low as $1,500 with 1,000 ft. of Bullet Line ready to run!

PimpWinchingSystems · Faceplant Joined: 04 Mar 2007 Posts: 43 City: Tallahassee

And if you didnt already know... Bullet Line is the best winch line on the market!

bochner · Frontside 180 Joined: 13 Mar 2007 Posts: 470 City: Miami

sick pics. looks like u have alot of decks

stompin9s · Posted: Apr 09, 2007 7:56 pm Post subject:

PIMP winches are so PIMP. im gettin one as soon as i get graduation money