INTEG 39.75 [ heLp ]

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

This might be 1 stupid question..

But I just got my new Integ TNT and there is only 1 hole that goes thru. The others can only be viewed under the board.

How I'm supposed to put my fins? I got the hyperlite P-wing .8"

Also I'm asking here cause the board is here but the fins I left in my countryside spot"!

PS: I only got the board.. no fins!

Thanks!

TannerC · Backside 180 Joined: 17 Mar 2005 Posts: 1694 City: Nanaimo

Drill the other holes you need through the board, they are pre drilled halfway i think. If not just line it up and drill where you need to.

electricsnow · cassette Joined: 14 Sep 2003 Posts: 10756 City: Jefferton

I think that's because the other two "holes" are for pegs of sorts, that help keep the fin lined up and and aid a bit with durability (take a look at the integrity fins and you'll see what I mean). The only part of the fin that would actually go through the entire board is the center screw, which is what will attach the fin to the board.

nick · Posted: Feb 23, 2007 11:25 am Post subject:

Yea those weren't meant to be drilled through, I wouldn't try to drill in for hyperlite fins.

tad · 360 flip Joined: 07 May 2006 Posts: 5031

electricsnow, you're right. The integ fins only use 1 screw but you can use any fin... I used an Impulse fin on my TNT, just swapped the threaded pins.

Jordan Sprague · Posted: Feb 23, 2007 11:59 am Post subject:

try riding without fins im sure that would help:)

wakemitch · Posted: Feb 23, 2007 12:02 pm Post subject:

S!c, hyperlite fins only work on hyperlite boards.

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

Beaver, yeah! you are right. This might work... but I can't do this. It is so pretty and new. =)

electricsnow, I can imagine it. Do you have those pics? Someone has some pics of their fins? Appreciated.

che blanc, I wont! =) Thanks again.. the board is amazing //

lake tarpon, do you have some pics?

royGbiv, I still want to use some fins. But I will try finless for this board. thx

wakemitch, DAMN! Didn't see this comming! but thanks for your help..

doubleg · Posted: Feb 23, 2007 12:51 pm Post subject:

I got a friend to take off about 0.2" off the Integ fin like what RUSSIAN did in this post:

http://www.wakeskating.com/forum/viewtopic.php?t=10907&postdays=0&postorder=asc&highlight=integrity+fins&start=20

I did the same thing as he did and just took the bottom off instead of trying to reshape the fin. It worked well for me.

You might want to put in an order for the Integ fin and do the same instead of drilling the board... Less risk and probably a better experience. My take.

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

Or I can just weld something on the P-wings! What do you think?

Thanks for your help //

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

Just gripped it!
Jessup grip rulz //

B-Lane · Backside 180 Joined: 10 Nov 2006 Posts: 946 City: Towanda

thats a nice looking grip job. Cool

Schmaltz · Backside 180 Joined: 16 Sep 2003 Posts: 721 City: San Jose

soy escuala · Backside 180 Joined: 16 Jan 2006 Posts: 2248

schmaltzy....

we have rounded grip now? that looks pretty sick...

Schmaltz · Backside 180 Joined: 16 Sep 2003 Posts: 721 City: San Jose

soy escuala · Backside 180 Joined: 16 Jan 2006 Posts: 2248

ahh, cause in that pic homie's grip is rounded on all four corners in the middle... looks sick... Cool

Schmaltz · Backside 180 Joined: 16 Sep 2003 Posts: 721 City: San Jose

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

Schmaltz, thanks for your help! The board is too pretty to be drilled! I will just try to modify the fins! =)
Thanks and congrats on your product. Amazing quality and visuals..

Rounded corners //

No actually I have cutted 1.5 cm of each side ( cause I wanted more white there ) and also made the rounded corner myself! =)
I think that it works better with the board details...

Thanks alot!
Glad to know that you like it!

88skisupreme · Backside 180 Joined: 11 Nov 2004 Posts: 1342 City: ATX

don't forget to sand down the edges a little too.

S!c · Pop Shuvit Joined: 06 May 2006 Posts: 158 City: São Paulo

88skisupreme, what do you mean when you say 'sand'?! LoL
( i have no idea of what you are talking about )

Thanks!