cassette 05 41" concave

Raven · Posted: Feb 03, 2006 11:25 pm Post subject: cassette 05 41" concave

Anybody know where I can find one? Thanks. Razz

integrity640 · Kickflip Joined: 30 Oct 2004 Posts: 2866 City: Ocala

id keep an eye out on ebay

kento911 · Kickflip Joined: 29 Mar 2004 Posts: 3657 City: Phoenix

Id keep an eye on a dumpster near you you can collect it one veneer at a time Shocked

classik skeet · Faceplant Joined: 14 Dec 2005 Posts: 9 City: naptown

i got a 41 flatt... Very Happy

integrity640 · Kickflip Joined: 30 Oct 2004 Posts: 2866 City: Ocala

kento911

so cold

JamesBoardr · Posted: Feb 04, 2006 1:21 pm Post subject:

kento911, stupid comment

daniel · Back Big Joined: 26 Apr 2004 Posts: 3669 City: Duncan

JamesBoardr, pointless comment

Mr. Top Hat · Dead Joined: 29 Aug 2004 Posts: 5818

big_dee45, ironic comment

daniel · Back Big Joined: 26 Apr 2004 Posts: 3669 City: Duncan

Mr. Top Hat, Smash

nick · Posted: Feb 05, 2006 1:03 am Post subject:

Jimmy Chadsey's garage.

Raven · Posted: Feb 05, 2006 1:37 am Post subject:

I won.........thanks to mario and 46 USD for a peice of wood that I got off ebay. It is everyhting a skate should be....no graphics, no paint, no fin holes, no fins Laughing

no grip tape, no sealant, and it needs to be finish sanded I think. What should I use to seal it with? Thankyou Birthday

electricsnow · cassette Joined: 14 Sep 2003 Posts: 10756 City: Jefferton

Kento's "so critical, the only thing he doesn't put down...IS the TOILET SEAT. Don't get me started!"--Ms Jeanie Darcy

integrity640 · Kickflip Joined: 30 Oct 2004 Posts: 2866 City: Ocala

electricsnow Laughing

Raven · Posted: Feb 06, 2006 12:47 am Post subject:

I was thinking about putting a cassette graphic on the bottom...something different, handpainted. After I paint her I should? Can anyone recommend a sealant/primer/epoxy. I've never sealed a baord before and I want this one to last. I don't know what steps to take or what products to use. Any help is appreciated as always. Thankyou!

wakeskate sml · Frontside 180 Joined: 01 Feb 2006 Posts: 251

dude on mine i used an oil-based spar marine varnish, and its holding up just fine

941wake · Pop Shuvit Joined: 29 Jan 2006 Posts: 152 City: sarasota

dude no way!

Jesse · Posted: Feb 09, 2006 3:59 am Post subject:

Spar Urethane is the best stuff you can get without having to get sealant in 5 gallon buckets. When you are finishing a board, Step 1: Sand it not super hard, but just enough, Step 2: Paint it, Step 3: Walk away and let the paint chill preferably overnight, Step 4: With a much finer grit sandpaper, sand it LIGHTLY, I mean hardly even pushing down with hand, you dont wanna mess up the work you did painting, Step 5: Seal it, about 2 coats with light sanding before the second coat
The most important thing is to not rush the process, Hope this helps bro.

VonBoggin · Backside 180 Joined: 21 Nov 2005 Posts: 1666 City: Austin

Raven, Ducktape and Rubber Cement

Raven · Posted: Feb 09, 2006 11:12 am Post subject:

Jesse, is the man! Good directions. Thanks bro.

labellethrasher · Posted: Feb 09, 2006 11:29 am Post subject:

Raven, as far as hand painting a Cassette graphic, I would instead get a nice peice of tag board, an exacto knife, and a cutting board and go to town on a detailed stencil. If you use spray paint it may last on the bottom of the deck longer and if it doesn't you can save the stencil and redo it when neccessary