New To the Sport need help

SPlash · Faceplant Joined: 22 Jan 2006 Posts: 3

k well i just made a wakeskate in woodtech its just about done ill show you guys pics when im done but i got some questions what should i run on it for fins i can get some made however i want jus twondering should i have like 2 small ones on the back and front spaced out well or wat?? any other tips? thanks guys

integrity640 · Kickflip Joined: 30 Oct 2004 Posts: 2866 City: Ocala

id go with 1 fin on each end of the board of equal size. @ fins on each end is used for nose presses and stuff on rails and funboxes. Id also try riding without fins to, good luck. Oh you can buy fins online at www.buywake.com and a couple other places.

scottyb · Posted: Jan 22, 2006 3:06 am Post subject:

its not like a wakeboard, you only need one fin in the front mid and back mid. You dont need fins though, its whatever you feel is best (try fins, no fins, one fin) see which one you like most. id recommend buying a board if your goign to get into it, which you will because wakeskating is like the Cool

.

Poo · Guest

SPlash, try getting the portable power planer and planing out a channel in it, its alot cheaper than fins. \___/ thats an example of what it might look like in the bottom of the board.

SPlash · Faceplant Joined: 22 Jan 2006 Posts: 3

k i might do that but the thing is i can get fins for free to tho and thanks for the help the board is exactly like a hyperlyte scrape same everything excpet wat its made for i think