Is it bad

DIRK · Posted: Jul 29, 2009 11:26 pm Post subject: Is it bad

if the edges of the concave on my board is coming up about a half an inch when i am riding? Laughing

its wierd because i cant tell a difference in pop but i think it is time for a new board..

88skisupreme · Backside 180 Joined: 11 Nov 2004 Posts: 1342 City: ATX

no its good, youre about to have a bi-level.

gregbockhold · Posted: Jul 30, 2009 8:05 am Post subject:

DIRK, My Oak started doing the same thing a couple of weeks ago, I decided it was time for a new board. BUT... 88skisupreme does have a good point.

wakeskatedude · Posted: Jul 30, 2009 8:46 am Post subject:

DIRK, drill small holes through the concave and use small screws to press the concave against the bottom, not the best solution but really easy

-=AlexXx=- · Posted: Jul 30, 2009 9:03 am Post subject:

88skisupreme, hahaha

Soulprogression · Posted: Jul 30, 2009 9:54 am Post subject:

wakeskatedude, did that with a lf, held up for another month or few till the bottom lam just dissapeared Shocked

sparrow.2 · Posted: Jul 30, 2009 11:10 am Post subject:

Do the screw thing but fill in the cracks with epoxy before you screw it all together and then paint the outside with epoxy. It'll be good as new (kinda...)