OAK UDDERS

Jim.Branton · Guest

I just got a pair and im about to drill holes in my board so i can use them. Im putting them on a tnt but i have no clue how far apart, how far from the tail/nose, and how far from the sides?

Jesse · Posted: Feb 10, 2009 7:05 pm Post subject:

Its personal preference but six inches in from tail is pretty starting point I feel, and then you can fine tune it to your tastes. With a pencil not a drill Laughing

Jim.Branton · Guest

I love it when you drill your holes and then you figure out that you used the wrong sized drill bit

stompin9s · Posted: Feb 10, 2009 8:16 pm Post subject:

wow.

u just randomly drilled into ur NT deck?

brassmonkey · Posted: Feb 10, 2009 8:19 pm Post subject:

Meh, hes got stacks of them. Throw it in the gudda, and go get anodda dewd.

Jim.Branton · Guest

stompin9s, no i had everything set out and i knew where i was gonna drill but the drill bit that i used was in the wrong slot so it said it was a different size so i didnt no and then bam! i went to put the screw in and it fell through Sad

TTUFAN24 · Posted: Feb 10, 2009 8:27 pm Post subject:

brassmonkey, straight outta 985

Jim.Branton · Guest

guess im drilling in the mutiny Confused

dscsk8er55 · Backside 180 Joined: 26 Jun 2006 Posts: 1030 City: Orlando

You could always just put them at a different point. Since this is a rail deck you won't mind a few extra holes.

Jim.Branton · Guest

i already have them on the mutiny Very Happy

Mr. Top Hat · Dead Joined: 29 Aug 2004 Posts: 5818

........

i hate you

Jim.Branton · Guest

Mr. Top Hat, thanks

*Nate · Backside 180 Joined: 11 Mar 2008 Posts: 1230 City: Nokomis

Do you just straight up drill holes in the deck and put on the udders?

Jim.Branton · Guest

*Nate, thats what i did!

stompin9s · Posted: Feb 10, 2009 10:17 pm Post subject:

show us footy/pics of u actually using them (if u ever do)

udders are for locking in nose/tail slides, or manuals and presses on objects that u ollie onto. this is just an estimate but i would think that there is less than 10% of the wakeskate community that could benefit from these...im not hating, just stating that these are for advanced riders and to just go ahead and drill them to a deck for sh*ts is just rediculous.

and jim, sorry for the rant if u actually will be trying to lock in nose slides on a flat bar w/ ur new udders

Jim.Branton · Guest

Gnarly Dancer 42 · 360 flip Joined: 21 May 2007 Posts: 5121 City: kalamazoo

bbalplaya2332 · Ollie Joined: 23 May 2008 Posts: 70

mojo · Posted: Feb 10, 2009 11:02 pm Post subject:

just drill them where you want them and fill in the wrong holes with candle wax. works great. i used to do it on my old byerly where the lock holes were.

bob. · Posted: Feb 10, 2009 11:17 pm Post subject:

using a book horizontal, parallel to the tail and using the corners of the book as markers works really well