Fins on integs

samm · Pop Shuvit Joined: 02 Aug 2008 Posts: 241 City: Austin

so i want to put fins on my integrity TNT... it has 3 holes in the bottom but only the one in the center is drilled all the way through. should i just use one bolt to put the fin on or do i need to drill out the other holes?

this might sound stupid by do i need to use the integrity fins or could i use other fins that i have?

thanks

wakemitch · Posted: Aug 22, 2008 11:16 pm Post subject:

samm, a lot of fins use one center screw and have two stabilizer bumps to keep it in place. if you use two fin screws you are more likely to feel them.

samm · Pop Shuvit Joined: 02 Aug 2008 Posts: 241 City: Austin

wakemitch, thanks

what company's fins use only the center hole and the two stabilizing bumps?

<MikeG> · Backside 180 Joined: 31 Dec 2007 Posts: 1293 City: PBG

i know when i got my kampus the fins were pretty little and they got the two stabilizing bumps, they fit in my integrity but i dont use fins so. and i got an extra set of them if ya want them let me know.

wakemitch · Posted: Aug 22, 2008 11:24 pm Post subject:

samm, i think everyone but LF, ronix and hype.

rainbow fins (who make the integ fins) and cdi are going to be the easiest after market fins to find. you might be better off just getting the integ fins so the base of the fin is flush with the rocker and then maybe grinding them down if you want them smaller.

samm · Pop Shuvit Joined: 02 Aug 2008 Posts: 241 City: Austin

wakemitch, thanks

if i order them from intergrity you think they'll ship immediately or take a while?

wakemitch · Posted: Aug 23, 2008 12:11 am Post subject:

samm, should be right away as long as they are in stock.

MattG · Posted: Aug 23, 2008 1:30 pm Post subject:

samm, 15$ is really cheap i have a set of integ fins and they are really big(1inch) and they are glassed so they wont be as durable as aluminum..

Greg T · Skeezer Joined: 13 Sep 2003 Posts: 2448 City: ohio

Check out the CDI wakeskate fin. I use it on my tnt and love it.

stOAKed · Backside 180 Joined: 28 Oct 2007 Posts: 1946

wakemitch, i have an oak and they do not have stablelizer bumps

Cyclone268 · Posted: Aug 23, 2008 1:38 pm Post subject:

Greg T, on BoardStop those are 18 bucks for one fin. what a fvcking rip.

MattG · Posted: Aug 23, 2008 2:30 pm Post subject:

stOAKed, wow that doesn't help AT ALL

samm · Pop Shuvit Joined: 02 Aug 2008 Posts: 241 City: Austin

Greg T, you use the 0.7 " fins?

Greg T · Skeezer Joined: 13 Sep 2003 Posts: 2448 City: ohio

Cyclone268, yes, but they are solid aluminum and perfectly sized. I will use that fin forever. There really aren't any other small, after market fins out there that work on an integrity either. Rainbows are all quite large.

Greg T · Skeezer Joined: 13 Sep 2003 Posts: 2448 City: ohio

samm, yea. On last years tnt. I don't know what one you are looking to add a fin to or if they changed the rocker line, but the CDI fin fits pretty well.