torque converter

PoopSkater · Posted: Aug 14, 2008 10:34 pm Post subject: torque converter

how hard are they to put on?

how much?

where do you get them?

Donk · Posted: Aug 15, 2008 12:37 am Post subject:

Pretty easy to put on. They fit on some engines better than others but they will fit on most engines. Sometimes you have the grind a little on the mounting plate that bolts to the engine but not too much. They average about $175. I recommend e-bay but sometimes you have to wait awhile for a good deal. If you search froogle.com and type in "comet torq a verter" you should get some pretty good results as well. They have 4 different models so make sure you get the one you want.

They make them for:
1" crankshaft for size 35 chain which has a 12 tooth drive sprocket
1" crankshaft for size 41 chain which has a 10 tooth drive sprocket

3/4" crankshaft for size 35 chain which has a 12 tooth drive sprocket
3/4" crankshaft for size 41 chain which has a 10 tooth drive sprocket

It's just 4 bolts that bolt it to the engine and then one bolt that holds the drive pully on once you put the belt on.

POPTART · 360 flip Joined: 24 Jul 2007 Posts: 7621

Donk, lies

LFArmada · Backside 180 Joined: 05 May 2008 Posts: 631 City: tucson

Donk · Posted: Aug 16, 2008 1:59 am Post subject:

It is accurate, he's just being silly.

POPTART · 360 flip Joined: 24 Jul 2007 Posts: 7621

Donk, there is no way they have proven any of this information