Deuce Pop

cjbecker · Posted: Jun 25, 2007 11:58 am Post subject: Deuce Pop

hey i just got the deuce pop and i was wondering of anybody has use skateboard bushings for the spacers, or anyting else.

the other thing was that i was talking to the GB rep and he told me to but spacers between the bolt and the top deck, do you do this.

Jesse · Posted: Jun 25, 2007 12:33 pm Post subject:

Hansel's board had them.

cjbecker · Posted: Jun 25, 2007 12:36 pm Post subject:

skateboard bushings you are talking about, would they make the board less prone to breaking.

JamesBoardr · Posted: Jun 25, 2007 12:37 pm Post subject:

skatewake41, rubbers washers. keeps the board from a direct pressure point

Jesse · Posted: Jun 25, 2007 12:38 pm Post subject:

skatewake41, Im talkin about washers on the top deck.

cjbecker · Posted: Jun 25, 2007 12:38 pm Post subject:

ok thanks.

cjbecker · Posted: Jun 25, 2007 2:14 pm Post subject:

JamesBoardr, should i use skateboard bushings cause the ones they give me are plastice, they are not very soft.

cjbecker · Posted: Jun 25, 2007 8:41 pm Post subject:

i am going to start off by saying that this board is the best board i have rode hands down, it has so much pop, it is not very sluggish, and it carvs so good, the only complaint is that after i rode it i took it apart and i have all of these cracks in the coating of the top deck is this normal or should i seal it, or should i contact gator.

cjbecker · Posted: Jun 25, 2007 8:47 pm Post subject:

o and one thing that i forgot to say is that the fin screw's heads are putting little holes in my top deck from the flex of the top deck is this going to be a problem.

McLOVIN · Backside 180 Joined: 03 May 2006 Posts: 1673

skatewake41, how does it feel compared the cassette bi?

cjbecker · Posted: Jun 25, 2007 8:50 pm Post subject:

i love it so much more than the cassette, it might just be that i am ready for a bi now, i was a begginer when i had the cassette and it might just of been to much for me.

i have rode so many boards and i normally dont like them but this is way out of my expectiations

McLOVIN · Backside 180 Joined: 03 May 2006 Posts: 1673

my cassette bi is simple money! but if i ever run out of decks, its good to know that gator has some decent chit

cjbecker · Posted: Jun 25, 2007 8:53 pm Post subject:

it might just be me but i keep going back to gator cause i love there boards.

cjbecker · Posted: Jun 25, 2007 9:45 pm Post subject:

i need help

cjbecker · Posted: Jun 25, 2007 10:32 pm Post subject:

i am going to start off by saying that this board is the best board i have rode hands down, it has so much pop, it is not very sluggish, and it carvs so good, the only complaint is that after i rode it i took it apart and i have all of these cracks in the coating of the top deck is this normal or should i seal it, or should i contact gator.

can anyone answer these questions

skatefilly · Posted: Jun 25, 2007 10:35 pm Post subject:

that happend with my bi to. it is just little stress crackys. from all that pizop. soo i wouldnt neccisarly worry about it, just know that bis to break as you are probably aware of already.

cjbecker · Posted: Jun 25, 2007 10:37 pm Post subject:

skatefilly, did you just keep on rideing it, should i seal it, and you know gator has a 12 month gurantee.

skatefilly · Posted: Jun 25, 2007 11:13 pm Post subject:

is that only manufacture defect though? not a broken top deck.

cjbecker · Posted: Jun 25, 2007 11:15 pm Post subject:

it is not broken yet i am going to gice the indiana gator boards rep tomorrow see if he can do anything about it.

annapoliswskate · Posted: Jun 25, 2007 11:20 pm Post subject:

wood and water don't mix. You have to come to terms that your top deck is gonna break at some point. THEY ALL DO. Marine seal the baby and get to it!