At any point in time....

Jama · Guest

Has Intergrity made a somewhat smaller fin? My mom, uncle, and uncle's girlfriend all ride my board reguarly and want something tighter on the water. I lost one of my fins that came with the board, and since they are offering to split the cost I was going to look around for any smaller fin that would do the job. Thanks guys.

electricsnow · cassette Joined: 14 Sep 2003 Posts: 10756 City: Jefferton

only the fins they have now (at least for the public). Back when mutiny had boards, those fins were way bigger, and not nearly as good. These rainbow fins are really nice.

scott a · "a" is for angel Joined: 17 Feb 2004 Posts: 4126

www.rainbowfins.com/wake

Jama · Guest

scott a, will all those fit the TNT?

mario c. · Guest

you should ask sleu if the cdl fins will fit. those look nice.

Tater Salad · Faceplant Joined: 21 Aug 2005 Posts: 12 City: Menominee

mario c., The cdi fins will fit, however, 1) you would either have to drill out the outside holes that are only halfway drilled out OR 2) get some sort of plug setup like the integ fins to keep it from turning.

scott a · "a" is for angel Joined: 17 Feb 2004 Posts: 4126

Jama, rainbow fin company makes the integrity fins, so their hole pattern will work with your TNT. i am not sure how flush they will fit to the board, but at least it will be usable. from there you can always sand the fin down so that it sits perfectly flush.

another idea is to head in to your local board shop and see if they have any old fins that they'd be willing to give to you. if so, sand them down to your liking. the fins i am using right now are some .8" gator fins that i chopped and sanded to .4."