Nug holes

POPTART · 360 flip Joined: 24 Jul 2007 Posts: 7621

im debating drilling a remote and trying to mount some of those anchor eyelits on the board but idk if I should drill all the way through or just screw them into the base...

anyone nugged one of those thick bastards yet?

BB · Backside 180 Joined: 28 Jul 2006 Posts: 1706

POPTART, Don't they have pre drilled holes?

miller · Backside 180 Joined: 08 Aug 2004 Posts: 2394 City: Regina

BB, the older ones don't

POPTART · 360 flip Joined: 24 Jul 2007 Posts: 7621

last years yan and this years ben, niether have holes
unless im missing them

TexasBlazed · Frontside 180 Joined: 13 Nov 2008 Posts: 384 City: DFW

my hooker doesnt have predrilled holes. just a spot for where you would drill them

POPTART · 360 flip Joined: 24 Jul 2007 Posts: 7621

TexasBlazed, all the way through or just use a wood screw and be done with it

jeff · Posted: Apr 13, 2012 1:47 pm Post subject:

I haven't done either.. But I'd say drill all the way thru. They will be taking some really hard hits from all angles, I think wood screws could rip out.

texasT · Posted: Apr 13, 2012 2:02 pm Post subject:

bachlonso · Backside 180 Joined: 02 Jul 2007 Posts: 670 City: NFA

POPTART, the thing you could do is get screw-in threads, pre-drill the board and then glue the threads into the board (still screw 'em in but use some epoxy to seal off the holes/wood. you should have a very strong and durable interface for your nugs then.