rail top

tjmac · Backside 180 Joined: 08 Nov 2007 Posts: 780 City: valley

what can you put on top of a rail?? we built a rail and its all done except we need to put something to slide one?? do we need trex or could we like get a slippery tarp or like wax paper??

samm · Pop Shuvit Joined: 02 Aug 2008 Posts: 241 City: Austin

trex

DirtyCracker · Guest

tjmac, slippery tarp and wax paper are probally the best ideas ever. try em tell em how they work

416 · Backside 180 Joined: 25 Jul 2008 Posts: 836 City: Toronto

i used pastic from my local hockey arena, i used the blue line plastic. very hard, easy to cut, and durable

DirtyCracker · Guest

eiowae, just tore it off the wall eh

DIRK · Posted: Aug 13, 2008 7:34 pm Post subject:

how about those white board that the teachers have i forgot what they are called but it would be sick Twisted Evil

tjmac · Backside 180 Joined: 08 Nov 2007 Posts: 780 City: valley

we ended up usin trex. we found some in the back of a trailer at a building site so we snagged 4 pieces. it fit perfectly on the rail like an inch hangin over the side. well we have it built but we cant get it to stay in the water. we're putting in his lot out like 20 feet and the sand under water slants and it wont stay standing up it just falls over. thats our next problem, any suggestions??

slothboy420 · Frontside 180 Joined: 12 Mar 2006 Posts: 274 City: atco

snap some pics of thing. sounds like you need too pound down smoe 4x4s in the gound for the rail like so.

DirtyCracker · Guest

tjmac, you gotta some times put cross supports

Jholiday · Posted: Aug 15, 2008 9:11 am Post subject:

tjmac, bro go to lowes... get some "choice deck" .... its like trexx, but thinner, wider and a lil cheaper... def ur best bet

DIRK · Posted: Aug 15, 2008 12:09 pm Post subject:

slothboy420, thats sick

ride on??

Hanlon99 · Ollie Joined: 21 Apr 2008 Posts: 90 City: Aurora

tjmac · Backside 180 Joined: 08 Nov 2007 Posts: 780 City: valley

heres the top

tjmac · Backside 180 Joined: 08 Nov 2007 Posts: 780 City: valley

then heres the rail all done

sandiego4real · Backside 180 Joined: 03 Dec 2007 Posts: 518

Looks good!

skimboarder · Posted: Aug 15, 2008 11:18 pm Post subject:

looks sick, shred that thing! Smash

tjmac · Backside 180 Joined: 08 Nov 2007 Posts: 780 City: valley

skimboarder, were tryin to shred it but we can get it to stay in the water. do u guys think just poundin it in woulw work?? cause if u look closley on the bottom we have pieces of wood on all the supports and we were plannin on puttin sandbags on it but that isnt workin because it doesnt stay level.

DirtyCracker · Guest

tjmac, ya just pound that bizatch in