View previous topic :: View next topic |
Author |
Message |
stussy Backside 180
Joined: 22 Sep 2003 Posts: 706
|
Posted: Sep 30, 2003 9:45 pm Post subject: dave's rail? |
|
|
hi dave this one is for you, on wakeboarder.com, theres some footy of you doing a boardslide shov off on that rail thats built into the water... how do you build that rail and are you alowd to leave it in there like that? that rail looks so good, its like the ones on the kampus site footage _________________ Can't eat at McDonald's every day - Shannon Hoon |
|
Back to top |
|
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 01, 2003 10:13 am Post subject: |
|
|
That rail is really sweet. It is made out of fence posting, a 2x6, synthetic wood decking and some fence brackets. My friend and I just went to Home Depot one day and used our imagination and came up with a good concept. We didn't want to have to leave them out there, so we made it to where we can set them up and take them down in less than 10 minutes. The synthetic wood slides great and is cheap.
http://photos.wakeboarder.com/showphoto.php?photo=187&password=&sort=7&thecat=512 |
|
Back to top |
|
|
greg van wagnen Backside 180
Joined: 14 Sep 2003 Posts: 1924 City: Columbus
|
Posted: Oct 01, 2003 11:05 am Post subject: |
|
|
can you give us details on how to make rails like the two i see in the video that go up and down in 10 mins? id love to have a rail but the people on the like will get all pissed off and make us take it down but if we dont leave it up unless were using it they shouldnt care to much. whats cost and some details of how to make it or something? _________________ P.S.... this is what part of the alphabet would look like if Q and R were eliminated |
|
Back to top |
|
|
Seth Martin Faceplant
Joined: 15 Sep 2003 Posts: 7
|
Posted: Oct 01, 2003 2:27 pm Post subject: |
|
|
HA! dave's rail??? Seth's rail!!!!
Its all good. This simple rail provided many, many hours of fun. Everyone really was excited about it and helped out a lot.
What i did for the first rail was buy:
1 - 20 foot 2x6 pressure treated
7 - fence posts, standard size - not the corner posts
7 - brackets that attach the posts to the 2x6, these are an L shaped bracket that are fastened to the 2x6, then a strap goes around the post and is secured to the bracket with some bolts. I don't know the formal name for them.
1 - 16 foot section of composite decking material
1 - 8 foot section of composite decking material
1 - fence-post-driver
brought all this back to the shop and slapped the 16 foot section of decking material on top of the 2x6, screwed it down with wood screws. Cut the other piece of decking material to 4 foot and screwed it down to completely cover the 2x6.
Next flipped it all over so the wood side was up, so that the brackets could be fastened. I spaced them out evenly and then screwed them down with more wood screws.
Assembly on water:
We were on a sand bar and this worked great. I have no idea how this will work in other types of soil.
I usually set the rail up in waist deep water, so coose a spot where the water is anywhere from 2-3 foot. Set one if the fence posts by hand so that it is in the ground pretty good. Next put the rail in the water and use it to line everything up. It will float, so just dedicate someone to holding it in place. Take the other 4 fence posts and push them into the ground so that they are secure. Once all 5 are in a straight line get out the fence-post-driver and pund them into the ground. Get them all the same level and then place the 2x6 on top. Bolt the straps in place and you are ready to slide.
Since ours was set up in sand, we were limited on how high we could go, but the posts could easily be removed, it took some shaking but they would eventually come out. Mud may be different. The better the ground holds the pipe the higher you can make the rail. But it may not be that easy to remove the pipes.
Also, if you are in sand, you can use a fatsack pump to "dredge' out a hole, either to set or remove the posts.
If you need more detail or my babbling didn't make any sense ask Dave for better explanation. _________________ Seth |
|
Back to top |
|
|
stussy Backside 180
Joined: 22 Sep 2003 Posts: 706
|
Posted: Oct 01, 2003 2:35 pm Post subject: |
|
|
dave so you actually take the posts out of the ground everytime?(in ten minutes) _________________ Can't eat at McDonald's every day - Shannon Hoon |
|
Back to top |
|
|
stussy Backside 180
Joined: 22 Sep 2003 Posts: 706
|
Posted: Oct 01, 2003 3:34 pm Post subject: |
|
|
and dave can you noseslide ? _________________ Can't eat at McDonald's every day - Shannon Hoon |
|
Back to top |
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 01, 2003 4:40 pm Post subject: |
|
|
Replace all the "I's" in Seth's post with "We" and "Ours".
Stussy,
Yes, we would take it in and out in ten minutes are less. It was very simple.
I have not tried to noseslide my wakeskate yet. I can noseslide on a skateboard, so I think I could do it on my wakeskate if I spent some time working on it. We set these rails up a bunch last season and still have yet to set them up this season. Seth and I both sold our boats, so we didn't have a way out to the sandbar this year. We could only get there by boat. |
|
Back to top |
|
|
David Legler linear perspective
Joined: 14 Sep 2003 Posts: 628 City: Durham
|
Posted: Oct 01, 2003 6:26 pm Post subject: |
|
|
Dave,
Have you been working on a video or anything? i would like to see how riding has progressed and stuff. the only time i have gotten to see you ride is in that first video you posted. _________________ I <3 wakeskating |
|
Back to top |
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 01, 2003 10:39 pm Post subject: |
|
|
David,
I have not been filming at all. I think I only have one session on film of me from this season. This has been a weird season for me. Honestly, I only rode half as much as I usually do. I hurt my knee in July and couldn't ride again until the end of August. Plus, before the season, I took a new job and my wife and I moved to a new town. Right after that, I sold my boat. And to top it all off, my main riding partner sold his boat and it rained just about every day this summer. It has been totally nuts.
As for progression, I think the main thing I have improved this season is my consistency and linking tricks together. Even after sitting out for over a month, I was able to ride as if I never took time off. As I mentioned in my post earlier, I didn't do much sliding this season (that is pretty much all we did last season), but I really got into more technical tricks off the wake and some new lip tricks.
It has been a fun season, but it is a lot different without your own boat or your best friend's boat. If I would have been able to ride as much as I used to, this site would still be red. |
|
Back to top |
|
|
wake-till-i-die Pop Shuvit
Joined: 16 Sep 2003 Posts: 166 City: orlando
|
Posted: Oct 04, 2003 8:42 pm Post subject: |
|
|
dave i remember in th e old forums you guys had a drawn diagram of how you guys made tis rail i have sapen the last year tryin to find it but now i have i always tought you guys did dome kind of welding but i geust not, i love this idea cuz cops will come and then u just take it down. keep up the revolt!!!
sorry got a lil emotional _________________ nose blunts niggguuuuuhhhh.... |
|
Back to top |
|
|
funnyfeni Pop Shuvit
Joined: 15 Sep 2003 Posts: 231 City: casselberry
|
Posted: Oct 07, 2003 2:07 pm Post subject: |
|
|
hey dave i'll take your skates..if you dont want them |
|
Back to top |
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 07, 2003 2:35 pm Post subject: |
|
|
wake-till-i-die,
There was no welding. It was a very simple concept. Go to home depot and get a 2x6, some synthetic wood and then take a walk around the fencing section for pipes and brackets. It is really easy to find something that will work. The key is to have a good location where you can easily walk out into the water and set it up. Otherwise, I don't think our rail would have been successful.
funnyfeni,
Only if you come to my house and pick them up yourself. |
|
Back to top |
|
|
wcwakeskater Backside 180
Joined: 13 Sep 2003 Posts: 1442 City: Vicksburg
|
Posted: Oct 07, 2003 3:36 pm Post subject: |
|
|
you're in new orleans, not too far, what kind? |
|
Back to top |
|
|
freerider4 Backside 180
Joined: 14 Sep 2003 Posts: 2462
|
Posted: Oct 07, 2003 3:50 pm Post subject: |
|
|
how much did the rail cost |
|
Back to top |
|
|
funnyfeni Pop Shuvit
Joined: 15 Sep 2003 Posts: 231 City: casselberry
|
Posted: Oct 08, 2003 10:09 am Post subject: |
|
|
im out the door in 5 mins.. i'll be there for dinner..make extra |
|
Back to top |
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 08, 2003 11:28 am Post subject: |
|
|
I THINK it cost around $80.00 for everything. I'm not 100% sure though, it has been a while.
funnyfeni,
Come on down. We are having fried alligator, crawfish ettofeh, and all the raw oysters you can shuck. Aaaayyyeeehhh!! |
|
Back to top |
|
|
stussy Backside 180
Joined: 22 Sep 2003 Posts: 706
|
Posted: Oct 08, 2003 2:07 pm Post subject: |
|
|
the deep south _________________ Can't eat at McDonald's every day - Shannon Hoon |
|
Back to top |
|
|
Dave Barousse Faceplant
Joined: 10 Sep 2003 Posts: 5
|
Posted: Oct 12, 2003 12:03 pm Post subject: |
|
|
Here is a little more info about the rail and a short video of us putting it together. I forgot that I had this or I would have posted it sooner.
This story and video was done after the first time we set it up and hit it (which we only had about an hour of daylight to do), so we got faster with it the more we set it up and took it down.
http://www.krookedminds.com/showarticle.php?id=103 |
|
Back to top |
|
|
Yuri Raley
Joined: 14 Sep 2003 Posts: 1977 City: orlando
|
Posted: Oct 12, 2003 12:30 pm Post subject: |
|
|
thats preety cool! |
|
Back to top |
|
|
Steven M 2 Legit 2 Quit
Joined: 24 Feb 2004 Posts: 3638 City: Menlo Park/ Bay Area
|
Posted: Jul 07, 2004 5:49 pm Post subject: |
|
|
dave i wanna build a rail like this and was wondering what the brackets looked liked?
ive got the wood and trex but i still gotta get the brackets and metal post.
thx for the desighn(sp?) |
|
Back to top |
|
|
|
|