View previous topic :: View next topic |
Author |
Message |
MTwakeRaiderz Ollie
Joined: 15 Mar 2006 Posts: 88 City: The BORO, m10
|
Posted: Jun 30, 2007 9:35 am Post subject: Absolutely impossible to pull the rope out with TAV2 1inch |
|
|
It is Absolutely impossible fior me to pull the rope out with TAV2 1inch. That's f'd up that you can't use the copper idler bushing on this one. WTF - Any Suggestions? |
|
Back to top |
|
|
|
ripava82 Guest
|
Posted: Jul 23, 2007 6:07 pm Post subject: |
|
|
I had this exact problem, i hope you figured it out by now. but when it happened to me it was caused because the belt was to tight. i sprayed a little bit of WD-40 underneath the belt and i sanded the sides of the belt. it wore in a little more and now i don't have the problem anymore.
good luck, and i hope that made sense |
|
Back to top |
|
|
MTwakeRaiderz Ollie
Joined: 15 Mar 2006 Posts: 88 City: The BORO, m10
|
Posted: Jul 23, 2007 10:26 pm Post subject: |
|
|
yeah, i haven't tried any WD40 yet buy I have noticed that with some use, the belt streches a little and wears on the sides making it much easier. Thanks for the feedback. I appreciate it. I have my new winch in parts while the frame is off getting powder coated. I should sand the edges of the belt down a little bit to make it even easier. I can't wait to get it back though. |
|
Back to top |
|
|
urinal mint Backside 180
Joined: 20 May 2005 Posts: 1990
|
|
Back to top |
|
|
JeffKnox Backside 180
Joined: 09 Apr 2007 Posts: 2044 City: Jacksonville/Gainesville
|
Posted: Jul 25, 2007 2:14 pm Post subject: |
|
|
MTwakeRaiderz, is your chain too tight... when i had our chain on super tight we couldnt pull it out at all... but when the chain loosened up it got easier and easier... this was with a 3/4 in shaft _________________ PAVT since '05/'06 |
|
Back to top |
|
|
t-rex Backside 180
Joined: 24 Jun 2007 Posts: 2007 City: Denver
|
Posted: Jul 25, 2007 9:03 pm Post subject: |
|
|
urinal mint, no, you'll be fine, but like jeff said, don't make your chain to tight.
p.s. jeff i got a new number, it's a 904 number, i'll call tomorrow _________________
|
|
Back to top |
|
|
Mario C Frontside 180
Joined: 18 Oct 2006 Posts: 451 City: Lakeville
|
Posted: Jul 25, 2007 9:05 pm Post subject: |
|
|
there is a spring in the tav pully you have to adjust by loosening the nut a little. _________________ www.devotid.com
www.lasewer.com |
|
Back to top |
|
|
|
|