Where can I get these parts?

Distortion · Posted: Mar 26, 2007 5:20 pm Post subject: Where can I get these parts?

Where is the best place to pick the parts i have circled in the pic for my winch system? I dont know whos winch system it is but i hope you dont mind me using your pic for my question.

Thanks,
Mike

chriscut · Backside 180 Joined: 28 Jun 2004 Posts: 2000

northern tool, ebay, froogle.com,

the roller is a atv winch fairlead, and the other part is called a pillow block bearing.

DirtyCracker · Guest

off topic

but that frame looks insane

Distortion · Posted: Mar 26, 2007 5:49 pm Post subject:

Chris Barcellos, Ok thank you very much for your help. DirtyCracker, I love the design of the frame also, looks to be very light and moveable.

PimpWinchingSystems · Faceplant Joined: 04 Mar 2007 Posts: 43 City: Tallahassee

i can get u those part klep

Distortion · Posted: Mar 27, 2007 1:30 pm Post subject:

Chris I was thinking about asking you I just didnt want to bother you with that kind of stuff since Im sure youre busy building like crazy right now...Im gonna send you a PM.

spadedout41 · Frontside 180 Joined: 21 Jul 2005 Posts: 441

when searching for parts online , what category do you find those pillow block bearings?? also will any reasonably sized roller fairlead do the job ?? im starting to make my progress .....

spadedout41 · Frontside 180 Joined: 21 Jul 2005 Posts: 441

on those pillow block bearings .... does the steel set screw just screw up into the key way on the skaft once you cut it down or what ????

DirtyCracker · Guest

yes you can just srew them down in the key way. you can go on ebay look under pillow blocks. look for 1inch inside diamter

spadedout41 · Frontside 180 Joined: 21 Jul 2005 Posts: 441

do some of the axles come with the keyway in the shaft and some come wiht the keyway sticking out of the shaft >??? becuase i am looking for the split go kart hub to make my sppol and it looks like in the 1" hole there is an additional place for the keyway as if it was suppose to be sticking out of the axle ??? any help would be appreciated sorry if thats confusing

JB_CANSKATE · Posted: Apr 03, 2007 12:28 pm Post subject:

The axel will have the keyway and all your sprocket and axel attachments will have a keyway. You have to buy a thin piece that fits in the space. lol I can't think of what its called but its on the right side of this pic.

frankycouplepuphs · Backside 180 Joined: 04 Aug 2006 Posts: 542 City: Decatur

I agree w/ DirtyCracker, that is a phat frame.
Kinda looks like one of the robots from starwars episode one.

g-ram · Faceplant Joined: 20 May 2007 Posts: 7

from where or who can i get the cheapest winch from

tad · 360 flip Joined: 07 May 2006 Posts: 5031

I pm'd you but do a Search around for Grinch, Pulldozer, 12 Guage, Released (Pimpwinch)

research on here and www.winchskating.com