Search found 21 matches

All up it cost $2137 New Zealand dollars, reason it is slightly expensive is that 25% if not more was shipping costs without shipping costs it would be roughly $1300 USD.

Video from the weekend

http://www.youtube.com/watch?v=JNjdpbCppVc

This is a write up of how my third winch was built. The winch was built by two of us over 4 days and 60 combined hours.
Parts required:
Tav2 (went with a 12T sprocket made for #35 chain)
http://im ...

Not sure exactly how heavy it is, you can lift with one person but it is rather awkward, with two people it is easy though.

http://imageshack.us/a/img72/7815/gopr0008large.jpg

Here is just a short video I made after a recent winch trip which was to test out the upgrades to the winch.

http://www.youtube.com/watch?v=ijFrXoyniWA

Long story hah, friend had no idea about winching and heard me mention it, little did he know it was an actual winch company until after he had made and upped the vid.

Thanks, I just can't wait to get these changes done and go back out on the water again.

As in ski handle? Im quite happy with the size of it. Think its just a regular ski rope handle.

Thanks! Currently am doing a major overhaul on the winch, am buying a tav2 and am going to replace the brake lever throttle with a twist throttle mounted onto the frame. (I found the brake lever is ei ...

Just thought id update, ending up going with a 16 tooth and a 96 tooth to get my 6:1 ratio, winch has alot of speed and nearly enough torque to deep water start but not quite. Have just bought a TAV ( ...

Here is a video a good friend of mine made of our day out winching, unfortunately one of the go pro's memory cards corrupted so we lost some of the footage. Enjoy.
http://youtu.be/3a-1crnSAGs

Sites broken unfortunitly, if you want i can pm you a word doc with it all on there?

Yes but at your expensive, probably 700-800usd plus shipping

Hi guys just finishing off my winch will post pics once its completed, unfortunately I have run into financial troubles so I cannot keep it. 6.5hp Honda knock off, cc, 220m of line on an aluminium cut ...

Would also like to know this, thanks

Cheers, ill see how the ski rope goes though, also what spool width would you use?

Hi guys, picked up my spool walls today, aluminium laser cut Smile

, freebie from a mate. Anyway it has a 14inch outer diameter and an 8 inch inner diameter, it looks rather small in terms of how much rop ...

Have a cc thats 16tooth and a sprocket that's 76 tooth, will have a 10inch spool diameter and 600ft of rope. using a 6.5hp, Will this set up work? Thanks

thanks. I tink im goign to go with 12/72 and 6inch spool. would that deep water start me or not?